 | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  |
| PERFORMANCE SOUND DEADENER PERFORMANCE SOUND & HEAT DEADENER FOIL TOP / BUTYL BACK PEEL AND STICK 50 SQUARE FEET, INCLUDES APPLICATION ROLLER $ 199 PLEASE CALL FOR DETAILS & ORDERING 403-216-6060 |
based adhesive. With an aluminum constraining layer and an unique composition with
suspended mineral particles it has been proven to be extremely efficient at the conversion of
properly adhere to a contoured panel. It can be installed anywhere including under hood.
comes 1 foot wide and is available in 50 sq. ft. rolls.
APPLICATIONS
CP1 - PERFORMANCE SOUND & HEAT DEADENER can be die cut to shape and placed onto the
(typically at the sealer application operation). CP1 is used to treat metal panels, partitions,
ducts, doors, bins, panels, and so forth in Muscle Cars & Hot Rods. It can also be used for
ventilation ducts, relay cabinets, steel furniture, home appliances, sink units, computer
equipment, machine tools and many other objects that suffer from vibration-produced noise.
INSTALLATION
Use scissors, knife or die to cut CP1 to the desired size and shape before removing the release
liner. Next, remove dust, grease, moisture, and other foreign matter from the application
surface. Peel off the release liner. The simplest application technique is to bend the mat slightly
and attach it along its shortest edge. Press the mat firmly into place, using a roller for larger
pieces. The roller reduces the risk of leaving air pockets, which reduce CP1'S sound damping
capacity. It is more pliable if heated with a hairdryer or heat gun. BEWARE! It gets hot! Heat
likely won't be required if installing at or around room temperature. We also recommend sealing
all joining edges with 2" wide foil tape
CP1
SOUND/HEAT APPLICATION 2" WIDE
DEADENER ROLLER FOIL TAPE
